Skip to content
Limited-time offer. Save up to 50% on Speechly Premium. See pricing

How to Make Preview Read a PDF Aloud on Mac

How to make Preview read a PDF aloud on Mac: the Option-Esc steps, reading one page or column, Accessibility Reader, scanned PDFs and quick fixes.

Updated 6 min readBy the Speechly team
An older architect listens at his drafting table, hand on a printed plan held down with rose-pink tape beside a laptop.
Quick answer

To make Preview read a PDF aloud on Mac, turn on Speak selection in System Settings > Accessibility > Read & Speak. Open the PDF in Preview, press Command-A to select the text (or drag over one part) and press Option-Esc. Press Option-Esc again to stop. Without any setup, Edit > Speech > Start Speaking also works.

Key takeaways
  • Preview has no read-aloud button of its own; it uses the Mac's Speak selection (Option-Esc) and the Edit > Speech menu.

  • Select only what you want to hear: drag for a passage, Command-A for the whole PDF, or hold Option and drag to read one column.

  • On macOS Tahoe 26 and later, Edit > Speech > Open in Accessibility Reader gives you play, rewind and speed controls.

  • Scanned PDFs are pictures of pages, so Preview has nothing to read until the text has been recognized with OCR.

  • For long PDFs in natural AI voices with your place saved, open the file in Speechly for Mac or select text and press ⌘E.

Here's how to make Preview read a PDF aloud on Mac: turn on Speak selection once, open the PDF in Preview, press Command-A to select the text and press Option-Esc. Your Mac reads it aloud in its system voice and shows a small controller. Press Option-Esc again to stop.

Preview has no read-aloud button of its own. It relies on the Mac's built-in speech, so the trick is in selecting the right text. We checked every step against Apple's macOS 27 guides in November 2026. If you'd rather hear PDFs in natural AI voices, jump to Speechly for Mac.

How to make Preview read a PDF aloud on Mac

Step 1: Turn on Speak selection (once)

  1. Choose Apple menu > System Settings.
  2. Click Accessibility in the sidebar (scroll down if needed), then Read & Speak.
  3. Turn on Speak selection.

On macOS Ventura 13 to Sequoia 15 the screen is called Spoken Content. On Monterey 12 and earlier it's in System Preferences > Accessibility > Spoken Content.

Step 2: Select the text and listen

  1. Open the PDF in Preview. Double-clicking a PDF opens it there unless you've changed your default app.
  2. If you can't select text, choose Tools > Text Selection.
  3. Press Command-A to select all the text, or drag across the part you want.
  4. Press Option-Esc. Your Mac starts reading.
  5. Press Option-Esc again, or click Stop on the controller, to end it.

The controller's six buttons, from left to right, are speaking rate, skip backward, play or pause, stop, skip forward and open Accessibility Reader, per Apple's Speak selection guide.

To follow along, click the Info button next to Speak selection in Read & Speak and set Highlight content to words, sentences or both.

How to choose exactly what Preview reads

Selecting well is what makes Preview pleasant to listen to. Command-A grabs everything, including headers, footers and page numbers, so for most PDFs it pays to be a little more precise.

You want to hear How to select it in Preview
The whole PDF Command-A
A few paragraphs Drag across them with the Text Selection tool
A long passage across pages Click where it starts, scroll, then Shift-click where it ends
One column of a two-column page Hold Option and drag down the column
A specific page Choose View > Thumbnails, click the page, then drag over its text

Apple describes the Option-drag trick as selecting text vertically in its Preview text selection guide. It's the easiest fix when a journal article is read straight across both columns. For harder layouts, see how to listen to two-column PDFs.

How to use Edit > Speech in Preview (no setup)

This works even with Speak selection turned off.

  1. Select the text you want to hear.
  2. Choose Edit > Speech > Start Speaking.
  3. Choose Edit > Speech > Stop Speaking when you're done.

You can also Control-click the selected text and choose Speech > Start Speaking. Select the text first, because Preview may not speak anything that isn't selected.

How to listen to a PDF with Accessibility Reader

Accessibility Reader opens the text in a clean reading view with real playback controls, which suits long PDFs better than one-shot reading. It needs macOS Tahoe 26 or later.

  1. Go to System Settings > Accessibility > Read & Speak and turn on Accessibility Reader.
  2. In Preview, scroll to where you want to start.
  3. Choose Edit > Speech > Open in Accessibility Reader, or press Command-Esc.
  4. Click Play. Use Rewind, Forward, the Speaking Rate button and the slider to move around.

Turn on Autoplay in Reader with the Info button next to Accessibility Reader to start reading as soon as it opens. Apple's Accessibility Reader guide has every option.

How to tell if Preview can read your PDF

Preview can only read real text. A scanned PDF is a picture of each page, so there's nothing to select or speak.

Quick test: press Command-F and search for a word you can see on the page. If Preview finds it, the PDF has text and will read. If it finds nothing, it's a scan.

For a short scanned page, you can use Live Text as a workaround:

  1. Press Shift-Command-4 and drag over the page to take a screenshot. It saves to your desktop by default.
  2. Open the screenshot in Preview, drag to select the words, Control-click and choose Copy Text, as Apple's Live Text guide describes.
  3. Paste into TextEdit or Notes, select it and press Option-Esc.

For a whole scanned document, run it through OCR first. Our guide to listening to a scanned PDF covers the options.

How to change the voice and speed

Preview reads with your Mac's System voice. Go to System Settings > Accessibility > Read & Speak, choose a voice from the System voice menu and click the Info button next to it to download Apple's higher-quality voices for free and set the speed. Full steps are in how to change the text-to-speech voice on Mac.

How to listen to PDFs on Mac with Speechly

Preview is fine for a few pages. Over a 60-page report or a textbook chapter, you'll miss a voice that sounds natural and a player that remembers where you stopped.

Speechly for Mac is a text-to-speech reader that lives in your menu bar:

  1. Download Speechly for Mac.
  2. Open your PDF in Speechly and press play in the reading view.
  3. Or keep using Preview: select text and press ⌘E. A small floating mini player stays on top of your windows and reads it aloud.
  4. Choose from 25+ natural AI voices across eight languages and set the speed from 0.5× to 2×.

Words are highlighted as they're read, you can jump to any sentence and start there, and Speechly estimates how long the document will take to listen to. It saves your place, so you can pick up on your iPhone, iPad, Android phone or Windows PC with the same account. Speechly also reads Word documents, EPUB eBooks and text files.

The free plan includes two text-to-speech files with premium voices, no card required. Premium is $14.99/month or $139/year for unlimited listening. See more about listening to PDFs with Speechly.

Troubleshooting: Preview won't read a PDF aloud

  • Option-Esc does nothing. Check that Speak selection is on and text is selected. If another app uses the same shortcut, set a new one with the Info button next to Speak selection.
  • You hear a sound but no speech. Your Mac found no text. The PDF is probably a scan; try the Command-F test above.
  • You can't select any text. Choose Tools > Text Selection. If you still can't, the file is a scan, or its security settings may block text selection.
  • It reads headers, footers and page numbers. Select only the body text instead of pressing Command-A.
  • Columns come out jumbled. Hold Option and drag down one column at a time.
  • Words are run together or split oddly. Some PDFs store text in an unusual order. Try selecting a smaller section, or open the file in a reader built for long documents.
  • Your Mac describes every button and menu. That's VoiceOver. Press Command-F5 to turn it off.

Tips for listening to PDFs in Preview

  • Test one page first. A minute of listening tells you whether the reading order and voice work before you commit to the whole file.
  • Listen a chapter at a time. Preview doesn't remember where you stopped, so select one section, listen, and note the page.
  • Slow down for dense material. Highlighting plus a slightly slower rate helps with technical text.

For more options, including Adobe Acrobat Reader's Read Out Loud, see four ways to listen to PDFs on a Mac.

Frequently asked questions

Does Preview have a read aloud button?

No. Preview uses the Mac's built-in speech: select text and press Option-Esc, or choose Edit > Speech > Start Speaking. On macOS Tahoe 26 and later you can also open the text in Accessibility Reader.

Can Preview read the whole PDF without me selecting it?

Selecting is the reliable way. Press Command-A to select all the text in the PDF, then press Option-Esc, and your Mac reads from the top.

How do I make Preview read faster?

Click the speaking rate button on the left of the controller while it reads, or set the rate for good in System Settings > Accessibility > Read & Speak with the Info button next to System voice.

Can Preview read a PDF aloud on an iPhone or iPad?

Preview is a Mac app. On iPhone and iPad, open the PDF in Files or Books and use Speak Screen, or use an app that reads whole PDFs.

Can I save Preview's speech as an audio file?

Preview doesn't record or export audio. It only reads the PDF aloud while you listen.

Why does Preview read the page numbers and headers?

Command-A selects every bit of text, including headers, footers and page numbers. Select only the body text on each page to skip them.

Speechly

Listen to anything on your Mac

Select text in any app and press ⌘E. Speechly reads it aloud in natural AI voices, with PDFs, Word documents and EPUBs too.

Prices and features of other products were checked on November 18, 2026 and can change. Speechly is not affiliated with the other companies named here.