Skip to content
Limited-time offer. Save up to 50% on Speechly Premium. See pricing

How to Use Windows Narrator to Read Text Aloud

How to use Windows Narrator to read text aloud: turn it on, read a selection or whole document, change speed and voice, add natural voices and fix issues.

Updated 6 min readBy the Speechly team
A blind young woman in a magenta sweater types on a laptop with her head turned to listen, a white cane beside her.
Quick answer

To use Windows Narrator to read text aloud, press Windows logo key + Ctrl + Enter to turn it on. Click where you want to start and press Narrator + R to read from there, or select text and press Narrator + Shift + Down arrow. The Narrator key is Caps Lock or Insert. Press Ctrl to stop.

Key takeaways
  • Windows logo key + Ctrl + Enter turns Narrator on and off, and Caps Lock or Insert is the Narrator key used in every command.

  • Narrator + Shift + Down arrow reads selected text, Narrator + R reads from the cursor and Ctrl stops reading.

  • Narrator + Plus and Narrator + Minus change the speed; Narrator + Alt + Plus switches to the next voice.

  • Natural voices download free in Settings > Accessibility > Narrator and work without an internet connection once installed.

  • Narrator is a full screen reader, so it also announces buttons and menus; Edge Read Aloud or Speechly (Alt+R) suit people who only want to listen.

Here's how to use Windows Narrator to read text aloud: press Windows logo key + Ctrl + Enter to turn it on, click where you want to start and press Narrator + R. To hear just one passage, select it and press Narrator + Shift + Down arrow. The Narrator key is Caps Lock or Insert, and Ctrl stops reading.

Narrator is the screen reader built into Windows 10 and 11. It's designed so blind and low-vision people can use the whole computer by keyboard, so it does far more than read text. This guide focuses on the reading commands, checked against Microsoft's complete guide to Narrator in November 2026. If you only want to listen to selected text, Speechly for Windows is covered below.

How to turn on Narrator in Windows 11 and 10

  1. Press Windows logo key + Ctrl + Enter. Narrator starts and opens Narrator Home, a short welcome screen with QuickStart and links to settings.
  2. Or go to Settings > Accessibility > Narrator and switch Narrator on. On Windows 10 it's Settings > Ease of Access > Narrator.
  3. Press Windows logo key + Ctrl + Enter again to turn it off.

Windows logo key + Ctrl + N opens Narrator settings directly. If you don't want Narrator Home every time, turn off Show Narrator Home when Narrator starts there.

What is the Narrator key?

Almost every reading command starts with the Narrator key. By default, both Caps Lock and Insert work. In the commands below, "Narrator + R" means hold Caps Lock (or Insert) and press R.

How to use Windows Narrator to read text aloud

These are the commands that matter for listening, from Microsoft's Narrator reading guide and keyboard command list.

Read selected text

  1. Select the text with your mouse, or with Shift and the arrow keys.
  2. Press Narrator + Shift + Down arrow.
  3. Press it twice quickly to have the selection spelled.

Read a whole document, email or page

  1. Click where you want Narrator to start.
  2. Press Narrator + R to read from the cursor onward.
  3. Or press Narrator + Down arrow (or Narrator + Ctrl + R) to start reading the document.
  4. Press Ctrl to stop.

Read in smaller pieces

To hear Current Next Previous
Page Narrator + Ctrl + I Narrator + Ctrl + O Narrator + Ctrl + U
Paragraph Narrator + Ctrl + K Narrator + Ctrl + L Narrator + Ctrl + J
Line Narrator + I Narrator + O Narrator + U
Sentence Narrator + Ctrl + Comma Narrator + Ctrl + Period Narrator + Ctrl + M
Word Narrator + K Narrator + L Narrator + J

Pressing Narrator + K twice spells the current word. Narrator + W reads the whole window, and Narrator + T reads its title.

Read web pages with scan mode

On web pages and in emails, turn on scan mode with Narrator + Spacebar. Then press Up arrow and Down arrow to move through the page a paragraph at a time, hearing each one. Press Narrator + Spacebar again to turn scan mode off when you need to type.

Forgot a command? Narrator + F1 opens the full command list.

How to change Narrator's speed, volume and voice

You can change all three without leaving what you're reading:

To change Press
Faster / slower Narrator + Plus (+) / Narrator + Minus (-)
Louder / quieter Ctrl + Narrator + Plus / Ctrl + Narrator + Minus
Next / previous voice Narrator + Alt + Plus / Narrator + Alt + Minus
Less or more detail Narrator + V / Narrator + Shift + V

To set them for good, press Windows logo key + Ctrl + N and use the voice section of Narrator settings: Choose a voice, then Speed, Pitch and Volume. There's also an option to lower the volume of other apps while Narrator speaks, and a choice of audio output device.

How to add natural voices to Narrator

Narrator's natural voices sound much smoother than the older ones, and they're free.

  1. Press Windows logo key + Ctrl + N to open Narrator settings.
  2. Next to Add natural voices, select Add.
  3. Choose a voice, select Preview to hear it, then Install.
  4. Pick the new voice in Choose a voice.

Microsoft lists Jenny, Aria and Guy for US English, and says natural voices run on your PC and work without an internet connection once downloaded. If you don't see the option, install the latest Windows updates. Older SAPI 5 voices come from Add legacy voices, which opens Time & language > Speech. More options are in how to add more text-to-speech voices in Windows 11.

How to make Narrator read less clutter

By default, Narrator describes controls as well as text, which is useful for navigating but tiring if you only want to hear an article.

  • Lower the verbosity. Press Narrator + V to cycle levels. Level 1 is text only; level 3 is the default and includes control details.
  • Read selections, not screens. Selecting a passage and pressing Narrator + Shift + Down arrow skips menus and toolbars.
  • Use Reading mode first. In Microsoft Edge, press F9 to strip a page down to the article, then let Narrator read it.

A simpler option: Read Aloud in Edge or Word

If you don't need a screen reader, Windows has lighter tools that just read:

Both only work inside their own app. Our roundup of free ways to use text to speech on Windows compares every built-in option.

How to read text aloud in any Windows app with Speechly

Narrator talks about everything you touch, and Read Aloud works only in Edge or Word. If you want any text you select, in any app, read in a natural voice, that's what Speechly does.

Speechly for Windows is a text-to-speech reader:

  1. Download Speechly for Windows.
  2. Select text in any app: an email, a PDF open in Edge, a Word document, a chat message.
  3. Press Alt+R. A floating player opens and reads it aloud.
  4. Choose from 25+ natural AI voices across eight languages and set the speed from 0.5× to 2×.

Recent readings are saved, and the same account works on Mac, iPhone, iPad and Android. The free plan includes two text-to-speech files with premium voices; Premium is $14.99/month or $139/year for unlimited listening. Speechly is a reading tool, not a screen reader, so if you rely on Narrator to use Windows, keep using it alongside.

Troubleshooting: Narrator not reading text

  • Windows logo key + Ctrl + Enter does nothing. The shortcut may be turned off. Open Settings > Accessibility > Narrator and turn on Keyboard shortcut for Narrator, or switch Narrator on there.
  • Narrator stops mid-sentence. Pressing Ctrl or another key interrupts it. Press Narrator + R to carry on from the cursor.
  • Caps Lock keeps turning on. Change the Narrator key to Insert only in Narrator settings.
  • Narrator reads every button and label. Press Narrator + V to drop to a lower verbosity level.
  • It won't read a PDF. The file is probably a scan. See how to make Windows read a PDF aloud.
  • You can't hear Narrator. Check the Narrator audio output device in Narrator settings and your PC's volume.
  • Narrator starts every time you sign in. Turn off Start Narrator after sign-in in Narrator settings.

For problems with other Windows reading tools, see text to speech not working on Windows.

Frequently asked questions

How do I make Narrator read only the text I select?

Select the text with your mouse or keyboard, then press Narrator + Shift + Down arrow. Press it twice quickly to have the selection spelled out.

How do I turn off Narrator?

Press Windows logo key + Ctrl + Enter again. You can also go to Settings > Accessibility > Narrator and switch Narrator off.

Is Narrator free?

Yes. Narrator is built into Windows 10 and Windows 11, and its natural voices download at no cost from Narrator settings.

Can Narrator read PDFs?

Yes, when the PDF has real text, for example opened in Microsoft Edge. Scanned PDFs are images of pages, so Narrator can't read them until they've been through OCR.

How do I make Narrator stop announcing every button?

Lower the verbosity. Press Narrator + V until you hear the level you want, or choose a lower level under Verbosity in Narrator settings. Level 1 is text only.

Why does Caps Lock not work normally when Narrator is on?

Caps Lock is one of the default Narrator keys. In Narrator settings you can make Insert the only Narrator key so Caps Lock works as usual.

Speechly

Listen to anything on Windows

Select text in any app and press Alt+R. Speechly’s floating player reads it aloud in natural AI voices.

Prices and features of other products were checked on November 18, 2026 and can change. Speechly is not affiliated with the other companies named here.